How to connect jumper cables or a battery charger?

Auto electrical systems are not so difficult, and there are a lot of technologies that we tend to use nowadays - from generators to lead-acid batteries - that exist for a long time.

How to connect jumper cables or a battery charger? Procedures for installing cables safely?

Connecting Jumper Cables or Battery Charger Safely

Regardless of the vehicles in question, the fundamental plan behind safely connecting jumper cables is to attach the electrical system of a donor vehicle, that contains a smart battery, to the electrical system of a vehicle with a dead battery. Positive ought to be connected to positive, and negative ought to be connected to negative, as connecting backward will harm each vehicle and build doubtless venturesome sparks, however a lot of thereon later.

Procedures for installing cables safely

1. Turn off the two cars.

2. Connect one wire to the positive terminal (+) of the donor battery.

3. Connect the corresponding cable to the positive terminal (+) of the dead battery.

4. Connect the wire opposite the negative terminal (-) to the donor battery.

5. Connect the opposite end of that cable to detect the metal on the engine or car tire with the dead battery.

The battery charger is connected identically, except for the donor battery, you are using a charger. The positive charger cable must be connected to the positive battery (+) when the negative charger cable must be connected to detect the metal on the car engine or tire.